Changing bulbs to Corrado

    I read the instructions from Bentley Manual (Corrado). It said that I have to take whole headlight off..."pull it forward slightly at the top and lift it out". Tried to do that, but couldn´t get it loose, something is holding it. Do I have to use more force to get them out ? Just didn´t want to brake them.
    I´m sure most of you have done this :) , so could you help a novice who has owned Corrado G60  since March 2004.

    Pasi Mikkonen
    Nokia, Finland

    Not sure if it´s allowed to write english.
    Mein deutsch ist nicht so gut.... :cool:

    Corrado G60 -91
    RPM Tuning, Leistungskit 2 (206 PS)

    Hello!
    If You want to remove the headlight, you have to loosen 3 screws. Did you do so?
    The third one is easely overlooked if you don´t about it´s exsitence. There is a reason for the extreme long screwdriver in the cars toolkit. :winking_face: Look for the hole in the middle between the two upper screws. After you have undone the screw the headlight should come loose very easily.

    Was nicht dran ist, kann auch nicht kaputtgehen

    Hello! I read the instruction too fast :alien: ....it was also saying about the third screw ("Remove the two outer Phillips screws and LOOSEN THE CENTER SCREW A FEW TURNS"). Simple if you read the text carefully :winking_face:
    Thank you for answering !

    Corrado G60 -91
    RPM Tuning, Leistungskit 2 (206 PS)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden